How To Clean Remote Control Battery Terminals

How To Clean Remote Control Battery Terminals. Replace with fresh batteries. Use a toothpick to extract any gunk from the seam between the two halves of the remote but be certain that it does not break off and fall inside the remote.

Remove the batteries and clean the remote control terminals with a small solution of alcohol using a cotton bud or soft cloth then place the batteries back into the remote control. The remote control battery terminals may be dirty. Once they are clean you can add a light coat of dielectric grease to all the mating surfaces and terminals to help prevent further oxidation and corrosion.

Try not to saturate the area with excess liquid and use a little bit at a time to prevent getting liquid into the wiring inside.

First remove the battery door your remote may either have a locking tab on the bottom or a release button on the back. Remove the battery door. How to Clean Battery Terminals on Toys. To remedy the problem first remove the cables or wiring from your battery noting the following.